home *** CD-ROM | disk | FTP | other *** search
/ Hackers Underworld 2: Forbidden Knowledge / Hackers Underworld 2: Forbidden Knowledge.iso / PHREAK / CELPROG.TXT < prev    next >
Text File  |  1994-07-17  |  60KB  |  1,965 lines
  1.                  NAM Programming (Reprogramming) Instructions
  2.  
  3.                           For 30+ Cellular Telephones
  4.  
  5.                                   <--Part 1-->
  6.  
  7.                                   Presented By:
  8.  
  9.                           /E/D/I/S/O/N///C/A/R/T/E/R/
  10.  
  11.                                        Of
  12.  
  13.                                    NETWORK 23
  14.                                     24 HOURS
  15.                                  1200/2400 BAUD
  16.                                  (402) 467-2474
  17.  
  18. -----------------------------------------------------------------------------
  19. PLEASE NOTE: Area specific numbers contained within these programming
  20.              instructions may not be accurate for your cellular area.
  21. -----------------------------------------------------------------------------
  22.  
  23.                         Programming Instructions for:
  24.  
  25.                         DIAMONDTEL MESA90X HANDHELD
  26.  
  27.  
  28. ACTION                            TO STORE            DISPLAY
  29.  
  30. USED EQUIPMENT: TO DISPLAY CURRENT UNLOCK CODE -
  31. PRESS FCN 7
  32. ENTER 4 DIGIT SECURITY CODE
  33. ENTER NEW 3 DIGIT UNLOCK CODE
  34. PRESS CLR
  35.  
  36. PWR up unit
  37. Press "END" and hold within 10 seconds of pwr up
  38. Enter "5132920"
  39. Release END key.
  40.  
  41. 0                                 SEND                DUAL NO
  42.  
  43. XXXXXXXXXX                        SEND                NO1
  44.  
  45. _ _ _ _ _                         SEND                SID1
  46.  
  47. 1                                 SEND                LU1
  48.  
  49. 1                                 SEND                EX1
  50.  
  51. 334                               SEND                IPCH1
  52.  
  53. 07                                SEND                ACCOLC1
  54.  
  55. 0                                 SEND                PREF1
  56.  
  57. 10                                SEND                GIM1
  58.  
  59. 0                                 SEND                RI1
  60.  
  61. 1                                 SEND                DTX1
  62.  
  63. 1                                 SEND                AR1
  64.  
  65. 1234                              SEND                SEC
  66.  
  67. 1                                 SEND                EE
  68.  
  69. 1                                 SEND                C TONE
  70.  
  71. 0                                 SEND                AL
  72.  
  73. 0                                 SEND                BO
  74.  
  75. 1                                 SEND                BEEP
  76.  
  77.  
  78. TO EXIT PROGRAMMING MODE PRESS "END" AT ANY TIME
  79.  
  80. TO RESET NAM FROM THE LIMIT OF 3 PROGRAM ATTEMPTS
  81. PWR up unit
  82. Press "END" and hold within 10 seconds of pwr up
  83. TO RESET NAM OF MESA 90 HANDHELD USE THE CODE "6972814"
  84.  
  85.  
  86.  
  87.  
  88.                         Programming Instructions for:
  89.  
  90.                         DIAMONDTEL MESA99X HANDHELD
  91.  
  92.  
  93. ACTION                            TO STORE            DISPLAY
  94.  
  95. USED EQUIPMENT: TO DISPLAY CURRENT UNLOCK CODE -
  96. PRESS FCN 7
  97. ENTER 4 DIGIT SECURITY CODE
  98. ENTER NEW 3 DIGIT UNLOCK CODE
  99. PRESS CLR
  100.  
  101. PWR up unit
  102. Press "END" and hold within 10 seconds of pwr up
  103. Enter "5132920"
  104. Release END key.
  105.  
  106. 0                                 SEND                DUAL NO
  107.  
  108. XXXXXXXXXX                        SEND                NO1
  109.  
  110. _ _ _ _ _                         SEND                SID1
  111.  
  112. 1                                 SEND                LU1
  113.  
  114. 1                                 SEND                MIN MARK1
  115.  
  116. 334                               SEND                IPCH1
  117.  
  118. 07                                SEND                ACCOLC1
  119.  
  120. 10                                SEND                GIM1
  121.  
  122. 0                                 SEND                RI1
  123.  
  124. 0                                 SEND                DTX1
  125.  
  126. 0                                 SEND                AR1
  127.  
  128. 1234                              SEND                SEC
  129.  
  130. 1                                 SEND                CONTINUE D.T.M.F.
  131.  
  132. 0                                 SEND                AUTO LOCK
  133.  
  134. 0                                 SEND                BOOSTER
  135.  
  136.  
  137. TO EXIT PROGRAMMING MODE PRESS "END" AT ANY TIME
  138.  
  139.  
  140.  
  141.  
  142.                         Programming Instructions for:
  143.  
  144.                           GATEWAY CP 900 HANDHELD
  145.  
  146. USED EQUIPMENT: TO DISPLAY CURRENT UNLOCK CODE -
  147. CURRENT UNLOCK CODE CAN NOT BE SEEN AND MUST BE KNOWN TO CHANGE
  148. THE CURRENT UNLOCK CODE.
  149. PRESS MENU
  150. ENTER 03
  151. ENTER CURRENT 4 DIGIT SECURITY CODE
  152. ENTER NEW 4 DIGIT SECURITY CODE
  153. PHONE WILL AUTO EXIT TO READY
  154.  
  155. ACTION                            TO STORE            DISPLAY
  156.  
  157. PRESS MENU  99  ENTR SCRTY CODE(FCTRY PRST IS 9999)  PROGRAM NAM
  158.  
  159. _ _ _ _ _                         SEND                SID
  160.  
  161. XXXXXXXXXX                        SEND                PHONE NUMBER
  162.  
  163. 0334                              SEND                IPC
  164.  
  165. 07                                SEND                ACCOL
  166.  
  167. 10                                SEND                GIM
  168.  
  169. 1                                 SEND                MOBILE I.D. NUMBER
  170.  
  171. 1                                 SEND                LOCAL USE MARK
  172.  
  173. 2                                 SEND                SYSTEM SELECT (B)
  174.  
  175. UPON PRESSING SEND THE PHONE WILL CYCLE TO WAIT  AND THEN RETURN TO THE
  176. READY MODE.
  177.  
  178. TO DISPLAY THE NEW PHONE NUMBER:
  179.  
  180. PRESS RCL 00
  181.  
  182.  
  183.  
  184.  
  185.                          Programming Instructions for:
  186.  
  187.                            GENERAL ELECTRIC MINI II
  188.  
  189. ACTION                            TO STORE            DISPLAY
  190.  
  191. USED EQUIPMENT: TO DISPLAY CURRENT UNLOCK CODE -
  192. PRESS FCN 7
  193. ENTER 4 DIGIT SECURITY CODE
  194. ENTER NEW 3 DIGIT UNLOCK CODE
  195. PRESS CLR
  196.  
  197. PWR up unit
  198. Press and hold END key within 10 seconds of pwr up
  199. Enter "6282905"
  200. Release END key
  201.  
  202. 0                                 Press SEND          DUAL NO
  203.  
  204. XXXXXXXXXX                        Press SEND          NO1
  205.  
  206. _ _ _ _ _                         Press SEND          SID1
  207.  
  208. 1                                 Press SEND          LU1
  209.  
  210. 1                                 Press SEND          EX1
  211.  
  212. 0334                              Press SEND          IPCH1
  213.  
  214. 07                                Press SEND          ACCOLC1
  215.  
  216. 0                                 Press SEND          PREF1
  217.  
  218. 10                                Press SEND          GIM1
  219.  
  220. 0                                 Press SEND          RI1
  221.  
  222. 1                                 Press SEND          DTX1
  223.  
  224. 1                                 Press SEND          AR1
  225.  
  226. 1234                              Press SEND          SEC
  227.  
  228. 1                                 Press SEND          EE
  229.  
  230. 1                                 Press SEND          C DTMF
  231.  
  232. 0                                 Press SEND          AL
  233.  
  234. 0                                 Press SEND          BEEP
  235.  
  236. 0                                 Press SEND          BO
  237.  
  238.  
  239. TO EXIT PROGRAMMING MODE PRESS "END" AT ANY TIME
  240.  
  241.  
  242.  
  243.  
  244.                        Programming Instructions for:
  245.  
  246.                             GENERAL ELECTRIC MINI
  247.  
  248. ACTION                            TO STORE            DISPLAY
  249. USED EQUIPMENT: TO DISPLAY CURRENT UNLOCK CODE -
  250. UNLOCK CODES WILL BE CHANGED ONLY IN PROGRAMMING MODE
  251. FOLLOW THE INSTRUCTIONS THAT FOLLOW
  252.  
  253. PWR up unit
  254. Press and hold CL key within 10 seconds of pwr up
  255. 0Enter "7591122"
  256. Release CL key
  257.  
  258.  
  259. XXXXXXXXXX                        PRESS SEND          MIN
  260.  
  261. 123                               PRESS SEND          UNLOCK
  262.  
  263. _ _ _ _ _                         PRESS SEND          SID
  264.  
  265. 1                                 PRESS SEND          LU
  266.  
  267. 1                                 PRESS SEND          MIN MARK
  268.  
  269. 334                               PRESS SEND          IPCH
  270.  
  271. 07                                PRESS SEND          ACCOLC
  272.  
  273. 0                                 PRESS SEND          PS
  274.  
  275. 10                                PRESS SEND          GIM
  276.  
  277. 1                                 PRESS SEND          EE
  278. 0                                 PRESS SEND          BOOSTER
  279.  
  280. 1                                 PRESS SEND          AR
  281.  
  282.  
  283. TO EXIT PROGRAMMING MODE PRESS "END" AT ANY TIME
  284.  
  285.  
  286.  
  287.  
  288.                        Programming Instructions for:
  289.  
  290.                               MITSUBISHI  800
  291.  
  292. ACTION                            TO STORE            DISPLAY
  293.  
  294. PWR